TP-Link MC100CM 10/100Mbps Multi-Mode Media Converter

TP-Link MC100CM 10/100Mbps Multi-Mode Media Converter

The TP-Link MC100CM is a 10/100 Mbps multi-mode media converter: it links a copper Ethernet device to multi-mode fibre with an SC connector, up to 2 km.

TP-Link MC100CM price in Kuwait

Ships to order
12.000 KD

Available with installation only

Free remote support included

WhatsApp

A person replies within 4–8 working hours

Brand
TP-Link
Model
MC100CM
Warranty
1-year warranty

About the TP-Link MC100CM

A media converter turns a copper Ethernet link into fibre and back, so two sites can be joined over a distance copper cannot reach, or across ground where copper would pick up interference or lightning surges. The MC100CM does this at 10/100 Mbps over multi-mode fibre with an SC connector, up to 2 km at 1310 nm.

That is enough for camera points, gate access controllers, IP phones and building-management links that need fast Ethernet rather than gigabit. Converters are used in pairs, one at each end of the fibre, or one converter facing a switch with a matching 100Base-FX port.

The RJ45 side auto-negotiates speed and duplex and detects crossover cables, and flow control protects against packet loss. LEDs show power and link activity on both sides. The unit draws just 1.2 W from a 9 V adapter, measures 94.5 x 73 x 27 mm and is rated for 0 to 40 °C. For single-mode fibre or longer runs, see the MC110CS; for gigabit, the MC210CS.

TP-Link MC100CM specifications

Ports
1 x 100Base-FX SC/UPC fibre, 1 x 10/100 RJ45 (auto MDI/MDIX)
Power
9 V 0.6 A adapter, 1.19 W maximum
Type
10/100 Mbps media converter, multi-mode
Distance
Up to 2 km (multi-mode)
Features
Auto duplex negotiation, 802.3x flow control, backpressure
Wavelength
1310 nm
Operating Temperature
0 to 40 °C
Model
TP-Link MC100CM
Dimensions
94.5 x 73 x 27 mm

TP-Link MC100CM features

  • Copper to multi-mode fibre
  • 10/100 Mbps
  • SC connector, up to 2 km
  • Auto MDI/MDIX
  • 1.2 W

Best suited for

Linking cameras, gate controllers and phones over multi-mode fibre where copper cannot reach.

Compare the TP-Link MC100CM with similar models

Available with installation only ? Free remote support included

Specification
TP-Link MC100CMThis model12.000 KWD
TP-Link MC110CS12.000 KWD
TP-Link MC210CS18.000 KWD
Ports1 x 100Base-FX SC/UPC fibre, 1 x 10/100 RJ45 (auto…1 x 100Base-FX SC/UPC fibre, 1 x 10/100 RJ45 (auto…1 x 1000Base-LX SC/UPC fibre, 1 x 10/100/1000 RJ45…1 x gigabit RJ45 data in, 1 x gigabit RJ45 power + data…
Power9 V 0.6 A adapter, 1.19 W maximumExternal adapter, 2.4 W maximumExternal adapter, 1.8 W maximumBuilt-in power supply, 100-240 V AC
Type10/100 Mbps media converter, multi-mode10/100 Mbps media converter, single-modeGigabit media converter, single-modePoE+ injector
DistanceUp to 2 km (multi-mode)Up to 20 km (single-mode)Up to 20 km (single-mode)—
Dimensions94.5 x 73 x 27 mm94.5 x 73 x 27 mm94.5 x 73 x 27 mm125 x 59.4 x 36.8 mm

TP-Link MC100CM questions

Do I need two MC100CM converters?

Usually yes, one at each end of the fibre, unless the far end is a switch with a 100Base-FX multi-mode port.

How far does the MC100CM reach?

Up to 2 km over multi-mode fibre.

Write a review