- Business
- ELV & Smart Building
- IoT & Sensors
IoT sensors & asset tracking in Kuwait
An alert on your phone before a hot server room or a leak becomes a loss.
IoT sensors are small connected devices that measure temperature, humidity, water or movement and send an alert when a value goes out of range, and asset tracking uses RFID tags to show where equipment and stock are. UltraTech Kuwait installs IoT sensors and asset tracking across Kuwait: temperature, humidity and water-leak sensors that send alerts from server rooms, cold stores and warehouses by email, SMS or app with escalation, and RFID tracking for equipment and stock.
Reviewed by Eng. M. Ahmed, Team Leader, Network & Project Specialist · Updated
Key facts
- Covers
- Environmental and leak sensors, RFID asset tracking
- Measures
- Temperature, humidity, water leaks
- Alerts
- Email, SMS or app, with escalation if the first person does not respond
- Where
- Server rooms, cold stores, warehouses, plant rooms
- Tracking
- RFID tags and readers for equipment and stock
- Coverage
- All six governorates of Kuwait
IoT and sensor services
Two services that watch what people cannot be watching all the time. Each is quoted on request after a survey.
Environmental & leak sensors
Get an alert before the server room overheats
Temperature, humidity and water sensors that alert the right person before a loss.
- Server rooms, cold stores and warehouses
- Thresholds set per room
- Alerts by email, SMS or app
- Escalation if nobody responds
Asset tracking / RFID
Track equipment and stock
RFID tags and readers that show where equipment and stock are, and when they move.
- Tags on equipment, pallets or stock
- Readers at doors and zones
- Movement history
- Stock counts without scanning every item
How a sensor system fits together
A sensor only helps if its alert reaches someone who acts. Each step is planned around who responds.
- 1
Sensors and tags
Temperature, humidity and leak sensors where the risk is; RFID tags on what is tracked.
- 2
Gateways and readers
Wired, Wi-Fi or low-power radio gateways, and RFID readers at doors and zones.
- 3
Network
A separate network for sensors, kept apart from the office.
- 4
Platform and alerts
Thresholds, dashboards and alerts by email, SMS or app, with escalation.
- 5
Building systems
Sensor values can feed the BMS so the building reacts as well as alerts.
- 6
The room itself
Racks, cooling and power in the server room the sensors protect.
What to monitor, and where
Sensors go where a loss would be expensive and nobody is watching: overnight, at weekends, behind locked doors.
Server room
Temperature, humidity, water
A failed AC or a leak stops the business
Cold store
Temperature
Stock spoils within hours if the cooling stops
Warehouse
Temperature, water, RFID
Stock protected and located
Plant room
Water, temperature
Leaks and overheating found early
How we install sensors
- 1
Survey
Rooms at risk, what can go wrong, network and power available, and who responds.
- 2
Design and quote
Sensors, gateways, thresholds and alert routes in a written quotation.
- 3
Install
Sensors and gateways placed, connected and calibrated.
- 4
Test and hand over
Every alert route tested end to end, dashboards and escalation handed over.
At handover:Sensor locationsThresholds per roomAlert recipients and escalationDashboard accessTest alerts sentBattery and maintenance notes
More explanation
Alerts that actually prevent a loss
- Right threshold
- Set close enough to warn early, far enough not to fire every day; it is tuned after the first weeks.
- Right person
- Alerts go to whoever can act, by email, SMS or app.
- Escalation
- If the first person does not respond, the alert goes to the next one.
- Leak sensors at the low point
- Water sensors go under AC units, near pipes and at the lowest point of the floor.
- Test the route
- Every alert route is tested at handover, and again whenever staff change.
How sensors connect
| Connection | Best for | Notes |
|---|---|---|
| Wired (PoE) | Server rooms and racks | Most reliable; powered from the switch |
| Wi-Fi | Rooms already covered by Wi-Fi | Easy to add; needs good coverage |
| Low-power radio | Warehouses and large sites | Long battery life and long range through a gateway |
| RFID | Equipment and stock | Tags read at doors, zones or by handheld |
IoT and sensor terms explained
- IoT
- Internet of things: small connected devices that measure and report.
- Sensor
- A device that measures temperature, humidity, water or movement.
- Threshold
- The value that triggers an alert.
- Escalation
- Sending an alert to the next person when the first does not respond.
- Gateway
- The device that collects readings from sensors and sends them on.
- RFID
- Radio-frequency identification: tags read by radio without line of sight.
- Dashboard
- The screen showing current readings and alerts.
Other ELV systems
- Public Address & AudioPaging, evacuation and background music
- BMS & AutomationLighting, HVAC and energy under one control
- TV & DistributionIPTV, satellite TV and synchronised clocks
- Intercom & Door EntryVideo intercom for offices, gates and buildings
- Specialised Building SystemsNurse call, hotel rooms and queues
- All of ELV & Smart Building
Tell us what you need to protect
Send the rooms or stock you want to monitor and who should get the alerts, or ask an engineer on WhatsApp.