- Business
- ELV & Smart Building
- BMS & Automation
BMS & building automation in Kuwait
One view of the building's systems, and lights and AC that switch off when nobody needs them.
A building management system (BMS) brings a building's air conditioning, lighting, power meters and sensors onto one screen, with schedules, alarms and records, so they can be seen and controlled together. UltraTech Kuwait integrates BMS, lighting control and energy monitoring across Kuwait, connecting equipment through BACnet, Modbus or KNX where it supports them; in Kuwait's climate cooling is most of a building's power bill, which is where control pays back fastest.
Reviewed by Eng. M. Ahmed, Team Leader, Network & Project Specialist · Updated
Key facts
- Covers
- BMS integration, lighting control, energy monitoring and metering
- Protocols
- BACnet, Modbus and KNX, checked per system at the survey
- Controls
- Schedules, sensors, scenes, alarms and trends
- Focus
- Cooling and lighting, the largest loads in Kuwait buildings
- Scope
- Priced per point list after a survey of the existing equipment
- Coverage
- All six governorates of Kuwait
BMS and automation services
Three services that turn separate building systems into one that can be watched and controlled. Each is quoted on request after a survey.
BMS integration
Control the building from one screen
HVAC, lighting, meters and sensors brought onto one screen, with schedules and alarms.
- Existing equipment connected where it supports BACnet, Modbus or KNX
- One dashboard for the building
- Alarms to the right person
- Trends to find faults and waste
Lighting control
Cut lighting left on overnight
Lights that follow the working hours, occupancy and daylight instead of staying on all night.
- Schedules per floor or area
- Occupancy and daylight sensors
- Scenes for meeting rooms and lobbies
- Manual override where people need it
Energy monitoring & metering
Find what uses the power
Meters on the main loads, so you can see where the electricity goes and what changed.
- Meters on AC, lighting and main boards
- Use by floor, tenant or system
- Alerts on unusual use
- Monthly figures to act on
How a BMS fits together
A BMS sits above the building's own systems. It reads them, sends them schedules and raises alarms; the systems keep doing their job.
- 1
Field equipment
AC units, chillers, fans, lighting circuits, meters and sensors in the building.
- 2
Controllers and gateways
Controllers that speak BACnet, Modbus or KNX, and gateways for equipment that speaks something else.
- 3
Network
A separate network for building systems, kept apart from the office network.
- 4
Supervisor
The BMS software with graphics, schedules, alarms and trends.
- 5
Sensors and alerts
Temperature, humidity and leak sensors that warn before a loss.
- 6
Secure remote access
Remote access for the facility team through a firewall and VPN, never open to the internet.
BMS protocols compared
We check what each piece of equipment speaks at the survey; the protocol decides how it is connected.
BACnet
HVAC, chillers, BMS supervisors
The common language of building automation
Modbus
Meters, pumps, generators, older plant
Simple and widespread; often through a gateway
KNX
Lighting, blinds, room control
Common in fit-outs and premium offices
DALI
Dimmable lighting
Control of individual light fittings
How we deliver BMS
- 1
Survey
Every system and its interface, what is already controlled and where energy goes.
- 2
Point list and quote
The points to connect, the graphics and schedules, and a written quotation.
- 3
Integrate
Controllers, gateways and network installed; points mapped and tested one by one.
- 4
Commission and train
Schedules and alarms set, the facility team trained, trends checked after a few weeks.
At handover:Point listSystem graphicsSchedules and setpointsAlarm list and recipientsNetwork drawingOperator training
More explanation
Where building automation pays back in Kuwait
- Cooling first
- Air conditioning is most of a Kuwait building's power bill. Schedules and setpoints that follow occupancy save the most.
- Empty rooms
- Lights and AC running in empty offices overnight and at weekends are the easiest waste to remove.
- Faults found early
- Trends show a unit running constantly or a room that never reaches its setpoint, before it becomes a breakdown.
- Measure before and after
- Energy meters on the main loads show what each change actually saved.
- Connect what is already there
- Most equipment can be connected through BACnet, Modbus or KNX; replacing it is rarely the first step.
What a BMS usually connects
| System | What the BMS does | Typical benefit |
|---|---|---|
| Air conditioning | Schedules, setpoints, alarms | Lower cooling bill, fewer complaints |
| Lighting | Schedules, sensors, scenes | No lights left on overnight |
| Power meters | Use by floor or system | Waste found and measured |
| Pumps and tanks | Status and alarms | Failures seen before they flood or stop |
| Environment sensors | Temperature, humidity, leaks | Server rooms and stores protected |
Building automation terms explained
- BMS
- Building management system: one system to watch and control a building's services.
- BACnet
- The standard protocol for building automation equipment.
- Modbus
- A simple, widespread protocol used by meters and plant.
- KNX
- A standard for lighting, blinds and room control.
- DALI
- A standard for controlling individual light fittings.
- Point
- One value the BMS reads or controls, such as a temperature or a switch.
- Setpoint
- The target a system works to, such as 24 °C.
- Trend
- A recorded history of a value over time.
- Gateway
- A device that translates between two protocols.
Other ELV systems
- Public Address & AudioPaging, evacuation and background music
- TV & DistributionIPTV, satellite TV and synchronised clocks
- Intercom & Door EntryVideo intercom for offices, gates and buildings
- Specialised Building SystemsNurse call, hotel rooms and queues
- IoT & SensorsAlerts for heat, water and moving assets
- All of ELV & Smart Building
Tell us about your building
Send the systems in the building and what you want to control or measure, or ask an engineer on WhatsApp.