- Business
- Fiber Optics
- Fiber Equipment Rental
Fiber splicing machine rental in Kuwait
Fusion splicers for teams that do their own fiber work, checked before every hire.
A fusion splicing machine aligns two optical fibers and melts them together with an electric arc, the tool every fiber team needs to join and terminate cable. UltraTech Kuwait rents fusion splicing machines across Kuwait by the day or the week to contractors and IT teams who do their own fiber work, checks and cleans each machine before it goes out, and can send engineers to splice instead when that works out cheaper.
Reviewed by Eng. M. Ahmed, Team Leader, Network & Project Specialist · Updated
Key facts
- Rental
- Fusion splicing machines by the day or the week
- Condition
- Each machine checked and cleaned before every hire
- For
- Contractors and IT teams with their own fiber technicians
- Alternative
- Our engineers splice for you, often cheaper for small jobs
- Testing
- OTDR testing and reports available with the job
- Coverage
- All six governorates of Kuwait
Fiber equipment rental
One service, for teams that splice themselves. The hire kit and dates are confirmed when you book.
Splicing machine rental
Rent a fusion splicer
A fusion splicer by the day or the week, ready to work when it reaches your site.
- Checked and cleaned before each hire
- Hire kit confirmed when you book
- Daily or weekly terms
- Engineers available instead of a machine
What a splicing job needs
A machine alone does not make a link. These are the parts of the job around it, and where we can help with each.
- 1
The splicer
Aligns and fuses the fibers and estimates the loss of each splice.
- 2
Preparation tools
Stripper, cleaver, cleaning supplies and heat-shrink sleeves for every splice.
- 3
Panels and closures
ODFs, pigtails and joint closures to hold and protect the splices.
- 4
Skilled splicing
Our engineers do the splicing when a job is small or urgent.
- 5
Testing
Power-meter and OTDR results to prove the work for handover.
Rent, or have us splice
For a few splices, having us do the job is often cheaper than renting a machine and doing it yourself.
Rent a splicer
Teams with trained fiber technicians and many splices
Your own schedule, by the day or week
Our engineers splice
Small or one-off jobs
No machine or training needed; splices recorded
Splice and test
Jobs that need a handover report
Splicing and OTDR certification in one visit
How a hire works
- 1
Book
Dates, fiber type and what the job involves; the hire kit is confirmed.
- 2
Check
The machine is checked and cleaned before it goes out.
- 3
Use
Your team splices on its own schedule for the days booked.
- 4
Return
The machine comes back for checking; testing can follow if you need a report.
With every hire:Machine checked and cleanedHire kit listAgreed hire datesReturn checklistOption of engineer supportOption of OTDR testing
More explanation
Before you rent a fusion splicer
- Count the splices
- Two cores per link plus every pigtail at each end. A handful of splices is usually cheaper done by our engineers.
- Check the fiber type
- Single-mode or multimode, and the cable construction, so the right settings and sleeves are used.
- Plan the protection
- Every splice needs a sleeve and a place in a tray or closure; have the panels ready before the machine arrives.
- Keep it clean
- Dust ruins splices. Work in a clean area and clean the fiber and the machine's clamps as you go.
- Test afterwards
- A splicer's loss estimate is not a certificate. Handover needs a power-meter or OTDR test.
Fusion and mechanical splices compared
| Splice | Loss | Best for |
|---|---|---|
| Fusion | Low, typically under 0.1 dB | Permanent links, backbones, FTTH |
| Mechanical | Higher than fusion | Quick temporary repairs |
Splicing equipment terms explained
- Fusion splicer
- The machine that aligns two fibers and fuses them with an electric arc.
- Cleaver
- The tool that cuts a fiber cleanly before splicing.
- Stripper
- The tool that removes the fiber's coating without scratching the glass.
- Heat-shrink sleeve
- The protective sleeve shrunk over each finished splice.
- Electrodes
- The parts of the splicer that create the arc; they wear with use.
- Core alignment
- Splicers that align the fiber cores themselves for the lowest loss.
- Splice loss estimate
- The machine's estimate of a splice's loss; not a substitute for a test.
Other fiber services
Tell us about your job
Send the dates, fiber type and number of splices, or ask on WhatsApp whether renting or having us splice is the better choice.