TP-LINK TL-SF1009P 9-Port 10/100Mbps Desktop Switch with 8-Port PoE+

TP-LINK TL-SF1009P 9-Port 10/100Mbps Desktop Switch with 8-Port PoE+
1 / 3

The TP-Link TL-SF1009P is a nine-port 10/100 desktop switch with eight PoE+ ports and a 65 W budget, Extend Mode to 250 m, and Priority and Isolation modes.

TP-Link TL-SF1009P price in Kuwait

Ships to order
20.000 KD

Available with installation only

Free remote support included

WhatsApp

A person replies within 4–8 working hours

Brand
TP-Link
Model
TL-SF1009P
Warranty
1-year warranty

About the TP-Link TL-SF1009P

The TL-SF1009P is a cost-effective PoE+ switch for devices that do not need gigabit speed: IP cameras, IP phones, door stations, card readers and small sensors. Each of its eight PoE+ ports gives up to 30 W, within 65 W in total, and a ninth port links to the recorder or router. All ports are 10/100 Mbps, which is plenty for a camera stream or a phone call but not for an access point or a PC.

It is designed for surveillance work. Extend Mode carries power and data up to 250 m for cameras at the far end of a car park or wall, Priority Mode protects ports 1 and 2 for the most important cameras, and Isolation Mode keeps the connected devices from reaching each other, which limits the damage if one camera is compromised.

The switch needs no setup, is fanless, measures 171 x 98 x 27 mm, and runs from a 53.5 V adapter, drawing about 4 W itself plus the PoE load. It is rated for 0 to 40 °C, so in Kuwait it should be inside a cooled room or a ventilated, shaded cabinet.

TP-Link TL-SF1009P specifications

Ports
9 x 10/100 Mbps RJ45 (8 with PoE+)
Forwarding Rate
1.34 Mpps
Switching Capacity
1.8 Gbps
PoE
802.3af/at on ports 1-8, up to 30 W per port, 65 W total
Power
External 53.5 V 1.31 A adapter; 3.96 W without powered devices
Modes
Extend (up to 250 m), Priority (ports 1-2), Isolation (ports 1-8)
Cooling
Fanless
MAC Address Table
2K
Operating Temperature
0 to 40 °C
Model
TP-Link TL-SF1009P
Dimensions
171 x 98 x 27 mm

TP-Link TL-SF1009P features

  • 8 PoE+ ports, 65 W
  • 10/100 Mbps for cameras and phones
  • Extend Mode to 250 m
  • Priority and Isolation modes
  • Fanless

Best suited for

Budget CCTV, IP phone and access-control installations where devices need power but not gigabit speed.

Compare the TP-Link TL-SF1009P with similar models

Available with installation only ? Free remote support included

Specification
TP-Link TL-SF1009PThis model20.000 KWD
Ports9 x 10/100 Mbps RJ45 (8 with PoE+)8 x 10/100/1000 PoE+ RJ45, 1 x 10/100/1000 RJ45, 1 x…16 x 10/100/1000 Mbps RJ455 x 10/100/1000 Mbps RJ45
Forwarding Rate1.34 Mpps14.88 Mpps23.8 Mpps7.44 Mpps
Switching Capacity1.8 Gbps20 Gbps32 Gbps10 Gbps
PoE802.3af/at on ports 1-8, up to 30 W per port, 65 W total802.3af/at on ports 1-8, up to 30 W per port, 63 W total—802.3af/at on ports 1-4, up to 30 W per port, 65 W total
PowerExternal 53.5 V 1.31 A adapter; 3.96 W without powered…External 53.5 V 1.31 A adapter; 7.0 W without powered…Internal 100-240 V AC, 10.68 W maximumExternal 53.5 V 1.31 A adapter
ModesExtend (up to 250 m), Priority (ports 1-2), Isolation…Extend (ports 1-4, up to 250 m), Priority (ports 1-2)…——

Same on all: Cooling

TP-Link TL-SF1009P questions

Is the TL-SF1009P gigabit?

No. All nine ports are 10/100 Mbps. For gigabit PoE+, see the TL-SG1210P.

Is 100 Mbps enough for IP cameras?

Yes. A 4K camera stream is typically 8 to 16 Mbps, well within 100 Mbps per port.

Write a review