- Business
- ELV & Smart Building
- TV & Distribution
TV distribution & time systems in Kuwait
Channels to every room and screen, and every clock and system showing the same time.
TV distribution brings satellite, terrestrial or streamed channels from one head-end to every room or screen in a building, over coaxial cable (SMATV, MATV) or the data network (IPTV); a master clock or NTP server does the same for time, so every clock and system agrees. UltraTech Kuwait installs IPTV, SMATV and MATV across Kuwait for hotels, hospitals, residential towers and offices, and master clock and NTP time systems that keep clocks, cameras and servers on the same time.
Reviewed by Eng. M. Ahmed, Team Leader, Network & Project Specialist · Updated
Key facts
- Covers
- IPTV, SMATV and MATV, master clock and NTP time servers
- SMATV
- Satellite channels over coax; suits towers with coax already in place
- IPTV
- Over the data network, with menus, welcome screens and on-demand content
- Time
- One time source for clocks, cameras, access logs and servers
- For
- Hotels, hospitals, residential towers, offices
- Coverage
- All six governorates of Kuwait
TV and time services
Two systems that run through a whole building. Each is quoted on request after a survey.
IPTV / SMATV / MATV
Put TV in every room
TV channels to every room or screen, over coax or the data network.
- Dishes and head-end for satellite channels
- Coax distribution or IPTV over the network
- Welcome screens and menus for hotels and hospitals
- Every outlet tested for signal
Master clock / NTP time server
Keep clocks and systems in sync
Every clock and system on the same time, from one trusted source.
- GPS-referenced time server
- Wall clocks driven from the master
- Cameras, recorders and access control synced
- Servers and network devices on NTP
How TV and time reach every room
Both systems start at one source in the building and are distributed to every room. The difference is the cable they ride on.
- 1
Source
Satellite dishes and receivers, or streamed channels, at the head-end; a GPS antenna for time.
- 2
Head-end
Equipment that turns channels into a signal for coax or a stream for the network.
- 3
Distribution
Coax with amplifiers and splitters, or the data network with multicast switches.
- 4
Rooms
TV outlets, set-top boxes or smart TVs with an app, and wall clocks.
- 5
Systems on the same time
Cameras, recorders, access control and servers set from the time server.
TV distribution types compared
The building decides: existing coax favours SMATV; a new hotel or hospital usually goes IPTV.
MATV
Terrestrial channels over coax
Simple buildings with few channels
SMATV
Satellite channels over coax
Residential towers with coax already in place
IPTV
Channels over the data network
Hotels and hospitals wanting menus and welcome screens
Hybrid
Coax for TVs, IPTV for some rooms
Buildings moving from coax to IPTV in stages
How we deliver TV distribution
- 1
Survey
Rooms, existing coax or network, dish location, channels needed and the screens in use.
- 2
Design and quote
Head-end, distribution, outlets or set-top boxes and a written quotation.
- 3
Install
Dishes, head-end, distribution and outlets; time server and clocks where included.
- 4
Test and hand over
Signal checked at every outlet, channels listed, time sync confirmed on every system.
At handover:Channel listSignal results per outletHead-end settingsDistribution drawingTime server settingsSystems synced list
More explanation
IPTV or SMATV
- SMATV uses coax
- Satellite channels go over coaxial cable to each outlet. It suits towers where coax is already in every flat.
- IPTV uses the network
- Channels travel over the data network to set-top boxes or apps, and add menus, welcome screens and on-demand content.
- Hotels and hospitals
- IPTV lets a room show the guest's name, hotel services or patient information alongside the channels.
- The network must be ready
- IPTV needs switches that handle multicast, or channels flood the network.
Why every system needs the same time
- Evidence
- Camera footage, access logs and server records only hold up when every system shows the same time.
- Investigations
- Matching a door event to a camera clip is quick when the clocks agree, and slow guesswork when they do not.
- One source
- A GPS-referenced time server gives the building one time, which clocks, recorders and servers all follow.
Which buildings need which system
| Building | Usual TV system | Time system |
|---|---|---|
| Hotel | IPTV with welcome screens | Wall clocks and NTP for every system |
| Hospital | IPTV for patient rooms | Master clock in wards and theatres |
| Residential tower | SMATV to every flat | NTP for cameras and access control |
| Office | IPTV or signage screens | NTP for servers, cameras and access |
TV and time terms explained
- IPTV
- TV channels delivered over the data network.
- SMATV
- Satellite master antenna TV: satellite channels over coax to every outlet.
- MATV
- Master antenna TV: terrestrial channels over coax.
- Head-end
- The equipment that receives channels and prepares them for distribution.
- Multicast
- Sending one stream to many screens at once without repeating it.
- Set-top box
- The box at each TV that receives IPTV channels.
- NTP
- Network time protocol: how devices set their clocks from a time server.
- Master clock
- The central time source that drives wall clocks across a building.
Other ELV systems
- Public Address & AudioPaging, evacuation and background music
- BMS & AutomationLighting, HVAC and energy under one control
- Intercom & Door EntryVideo intercom for offices, gates and buildings
- Specialised Building SystemsNurse call, hotel rooms and queues
- IoT & SensorsAlerts for heat, water and moving assets
- All of ELV & Smart Building
Tell us about your building
Send the number of rooms or screens, what cabling is in place and the channels you need, or ask an engineer on WhatsApp.