Akuvox ACR-CRP11 Keypad Card Reader (Wiegand)

Akuvox ACR-CRP11 Keypad Card Reader (Wiegand)
1 / 2

A low-cost plastic Wiegand reader with a keypad that reads 13.56 MHz and 125 kHz cards, used as an extra reader for an Akuvox door phone or access controller.

Akuvox ACR-CRP11 price in Kuwait

Available
15.500 KD

Free quotation, no obligation

Available with installation onlyFree remote support included

Brand
Akuvox
Model
ACR-CRP11
Warranty
1-year warranty

About the Akuvox ACR-CRP11

The Akuvox ACR-CRP11 is the plastic model of Akuvox's Wiegand keypad readers, and the lowest-cost way to add a reading point to an Akuvox system. It reads the card or PIN and passes it to the Akuvox door phone, access terminal or controller it is wired to, which decides whether to open the door.

The front has a 12-key layout (0–9 plus two function keys), a status light and a card area at the bottom. It reads 13.56 MHz and 125 kHz cards. On power-up the light turns blue with a beep; a valid card turns it green with another beep.

It runs on a 12V DC 1A adapter. The cable carries power, Wiegand D0 and D1 and ground, plus LED and buzzer lines that take relay signals from the door phone or terminal so the reader can show the result. Akuvox's guide shows it wired to an A094 controller.

It hangs on its mounting bracket with two screws and anchors (supplied). Akuvox advises keeping it out of direct sun and away from strong backlight. Indoors, or on a sheltered entrance, it is a cheap exit reader; for a reader in the open on a gate post, the metal ACR-CRM11 is the tougher choice.

Akuvox ACR-CRP11 specifications

Power Supply
12V DC, 1A
Type
Wiegand card reader with keypad (needs a controller)
Cards
13.56 MHz and 125 kHz
Keypad
12 keys (0–9 and two function keys)
Output
Wiegand (D0 / D1)
Housing
Plastic
Feedback
Status light (blue ready, green granted) and buzzer
Mounting
Mounting bracket, 2 × ST3.5×30 screws and anchors (supplied)
Works With
Akuvox door phones, access terminals and controllers (e.g. A094) over Wiegand
LED / Buzzer Lines
Take relay signals from the Akuvox door phone or terminal
Model
ACR-CRP11

Akuvox ACR-CRP11 features

  • Lowest-cost reader for an Akuvox system
  • Reads 13.56 MHz and 125 kHz cards
  • Keypad for PIN codes
  • Wiegand output plus LED and buzzer feedback lines
  • 12V DC 1A
  • Bracket, screws and anchors in the box

Best suited for

Exit readers and extra indoor reading points on Akuvox door phones and access controllers.

Compare the Akuvox ACR-CRP11 with similar models

Available with installation only · Free remote support included

Specification
Akuvox ACR-CRP11This model15.500 KWD
Akuvox ACR-CRP12220.000 KWD
Power Supply12V DC, 1A12V DC9–15 V DC—
TypeWiegand card reader with keypad (needs a controller)Wiegand card reader with keypad (needs a controller)UHF long-range vehicle readerUSB desktop card reader for credential enrolment
Cards13.56 MHz and 125 kHz13.56 MHz (Mifare) and 125 kHz (EM)——
Keypad12 keys (0–9 and two function keys)Numeric keypad for PIN entry——
HousingPlastic—White plasticBlack plastic
FeedbackStatus light (blue ready, green granted) and buzzerBuzzer and status lightBuzzer; multi-colour indicator (red, yellow, green…Buzzer, blue / green light

Akuvox ACR-CRP11 downloads

Akuvox ACR-CRP11 questions

Can the Akuvox ACR-CRP11 open a door by itself?

No. It reads cards and PINs and sends them over Wiegand to an Akuvox door phone, terminal or controller, which switches the lock.

What power does the ACR-CRP11 need?

A 12V DC 1A power supply.

Can the ACR-CRP11 be mounted outdoors?

It should be kept out of direct sun and strong backlight. For an exposed outdoor position, the aluminium ACR-CRM11 is the better choice.

Write a review