Dinstar UC120 SME IP PBX
The Dinstar UC120 is a compact IP PBX for small offices supporting up to 60 users and 20 concurrent calls, with optional analog ports. Supplied, installed, programmed and supported in Kuwait by UltraTech.
Supply confirmed upon project scope — contact us to begin
Our Installation Service
Site assessment, rack or wall installation, PBX deployment, SIP trunk configuration, extension creation, IP phone provisioning, IVR and call-flow programming, voicemail, call recording, analog/PRI/GSM trunk integration, testing and staff training.
If your building already has dozens of analog extensions, or you need PRI/E1 circuits or GSM trunks, the UC120 handles them natively on one appliance. An all-IP PBX would need separate gateways for each line type — more boxes, more failure points, more cost. For pure-IP offices we would recommend Grandstream or Yeastar instead, and we will say so.
Expert Installation
Certified engineers on-site
Warranty Covered
1 Year manufacturer warranty
Fast Deployment
4–8 Hours
Ongoing Support
AMC & technical support available
Who This Is Built For
| Best Suited For | Organizations in Kuwait needing a phone system that handles 60 users and mixes SIP with optional 2 fxo / 2 fxs — offices, hotels, clinics, schools and multi-branch businesses replacing an ageing PABX without abandoning their analog wiring. |
|---|---|
| Key Capabilities |
|
| Features | SIP-based IP PBX platformSupports up to 60 usersUp to 20 concurrent callsTrunk interfaces: Optional 2 FXO / 2 FXSIVR, call queues and ring groupsCall recording and voicemailConference bridge and pagingMobile and desktop softphone supportWeb-based management interfaceStandards-based SIP — vendor-neutral integrationSupplied, installed and supported in Kuwait by UltraTech |
| Use Cases |
|
| Industries | Corporate OfficesHospitalityHealthcareEducationRetailGovernmentCall CentresManufacturingWarehousing & LogisticsBanking & FinanceOil & GasTelecom Operators |
Technical Specifications
- Type
- IP PBX
- Brand
- Dinstar
- Model
- UC120
- Users
- 60
- Codecs
- G.711, G.729, G.723.1, G.722
- Network
- 10/100/1000 Mbps Ethernet
- Features
- IVR, queues, recording, voicemail, conference
- Protocol
- SIP 2.0 (RFC3261)
Frequently Asked Questions
How many users does the Dinstar UC120 support?
The UC120 supports up to 60 users with up to 20 concurrent calls.
Can the UC120 connect our existing analog lines?
Yes — trunk interfaces are Optional 2 FXO / 2 FXS. Dinstar's strength is mixing analog extensions, PRI circuits and GSM trunks with modern SIP telephony on one appliance.
Does UltraTech install and configure the UC120 in Kuwait?
Yes. We supply, install, program and support Dinstar equipment in Kuwait — including cutover from your existing system after hours to avoid disruption.
Can you reuse our existing telephone wiring?
Yes — this is exactly what FXS ports are for. We reuse your existing extension wiring so old analog phones keep working while you add IP phones gradually.
What support and warranty comes with the UC120?
It ships with the manufacturer hardware warranty, and UltraTech provides local configuration support and optional AMC maintenance contracts in Kuwait.
Installation & support for this product — anywhere in Kuwait
We don't just supply hardware — our own engineers install, configure, and support it, with a free site survey before every project.
PBX & Call Center Solutions
Extensions, IVR, queues, and full telephony setup
On-Site Installation
Engineers install and configure at your premises
Related Solutions We Install
Dinstar UC100 All-in-One Universal Gateway & IP PBX
The Dinstar UC100 is a all-in-one universal gateway with built-in IP PBX for SOHO and small businesses — 32 SIP users, 8 concurrent calls, integrated LTE/GSM, FXO and FXS interfaces plus Wi-Fi hotspot and VPN. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar UC120-1V20 SME IP PBX
The Dinstar UC120-1V20 is a UC120 variant combining VoIP trunking with two FXO ports for offices keeping existing landlines. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar UC120-2O SME IP PBX with 2 FXO Ports
The Dinstar UC120-2O is a compact IP PBX with two built-in FXO ports for connecting existing landlines, supporting up to 60 users. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar UC200 Pro 2-Port FXO Expansion Module
The Dinstar UC200 Pro-FXO2 is a 2-port FXO expansion module for the UC200 Pro, adding analog landline trunks to an existing PBX chassis. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar UC200 Pro IP PBX — 200 SIP Users
The Dinstar UC200 Pro-200 is a UC200 Pro licensed for 200 SIP users — mid tier of the Pro platform for growing organizations. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar UC200 Pro IP PBX — 60 SIP Users
The Dinstar UC200 Pro-60 is a UC200 Pro licensed for 60 SIP users — the entry tier of the Pro platform, upgradeable later without hardware change. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar UC200 Pro SME IP PBX
The Dinstar UC200 Pro is a enhanced SME IP PBX supporting 500 users with higher concurrent-call capacity and modular trunk options. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar UC200 SME IP PBX
The Dinstar UC200 is a SME IP PBX supporting up to 500 SIP users and 30 concurrent calls with modular analog and GSM options. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →Customer reviews
No reviews yet for Dinstar UC120 SME IP PBX. If you have used this product, yours would be the first.
Write a review
Share your experience with Dinstar UC120 SME IP PBX to help other buyers in Kuwait.