Dinstar MTG200-1E1 Digital E1/T1 PRI VoIP Gateway
The Dinstar MTG200-1E1 is a single-span E1/T1 PRI gateway that migrates a legacy PRI circuit onto a SIP phone system. Supplied, installed, programmed and supported in Kuwait by UltraTech.
Supply confirmed upon project scope — contact us to begin
Our Installation Service
Gateway installation and rack mounting, E1/T1 circuit termination, ISDN PRI/SS7 signalling configuration, SIP trunk setup to your PBX, channel and DID mapping, synchronisation and cutover testing.
The MTG200-1E1 lets you migrate legacy e1/t1 pri circuits onto a sip phone system without replacing your existing phone system. Because it speaks standards-based SIP, it works with whatever PBX you already run, making it the low-risk way to extend a phone estate rather than rip it out.
Expert Installation
Certified engineers on-site
Warranty Covered
1 Year manufacturer warranty
Fast Deployment
4–8 Hours
Ongoing Support
AMC & technical support available
Who This Is Built For
| Best Suited For | Sites in Kuwait that need to migrate legacy e1/t1 pri circuits onto a sip phone system — typically offices, hotels, hospitals, campuses and call centres modernising a legacy phone estate while keeping existing lines and handsets in service. |
|---|---|
| Key Capabilities |
|
| Features | 1 × E1/T1 (30 channels) digital spansISDN PRI and SS7 signallingMigrates legacy PRI circuits to SIPEcho cancellation and clock synchronisationHigh call-density in compact rack spaceCarrier-grade reliabilityWeb and CLI managementStandards-based SIP — vendor-neutral integrationSupplied, installed and supported in Kuwait by UltraTech |
| Use Cases |
|
| Industries | Corporate OfficesHospitalityHealthcareEducationRetailGovernmentCall CentresManufacturingWarehousing & LogisticsBanking & FinanceOil & GasTelecom Operators |
Technical Specifications
- Type
- Digital E1/T1 VoIP gateway
- Brand
- Dinstar
- Model
- MTG200-1E1
- Spans
- 1 × E1/T1 (30 channels)
- Codecs
- G.711, G.729, G.723.1, G.722
- Network
- 10/100/1000 Mbps Ethernet
- Protocol
- SIP 2.0 (RFC3261)
- Management
- Web GUI, auto-provisioning, SNMP
Frequently Asked Questions
What ports does the Dinstar MTG200-1E1 have?
The MTG200-1E1 provides 1 × E1/T1 (30 channels).
Does the MTG200-1E1 work with our existing PBX?
Yes. It is a standards-based SIP device, so we regularly pair Dinstar gateways with Grandstream, Yeastar, 3CX and Asterisk systems to add connectivity without replacing the PBX.
Does UltraTech install and configure the MTG200-1E1 in Kuwait?
Yes. We supply, install, program and support Dinstar equipment in Kuwait — including cutover from your existing system after hours to avoid disruption.
Can you reuse our existing telephone wiring?
In most cases yes. We assess the existing cabling during the site survey and reuse whatever is serviceable.
What support and warranty comes with the MTG200-1E1?
It ships with the manufacturer hardware warranty, and UltraTech provides local configuration support and optional AMC maintenance contracts in Kuwait.
Installation & support for this product — anywhere in Kuwait
We don't just supply hardware — our own engineers install, configure, and support it, with a free site survey before every project.
UTKGate Firewall Deployment
Professional NGFW setup, policies, VPN, and multi-site management
Security Services
Complete network security design and monitoring
PBX & Call Center Solutions
Extensions, IVR, queues, and full telephony setup
Related Solutions We Install
Dinstar DAG1000-16O 16-Port FXO Analog VoIP Gateway
The Dinstar DAG1000-16O is a 16-port FXO gateway for sites with many incoming analog landlines to terminate on IP. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar DAG1000-16S 16-Port FXS Analog VoIP Gateway
The Dinstar DAG1000-16S is a 16-port FXS gateway for connecting banks of analog extensions to an IP PBX. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar DAG1000-2S2O Hybrid FXS/FXO VoIP Gateway
The Dinstar DAG1000-2S2O is a compact hybrid gateway with 2 FXS and 2 FXO ports — the smallest way to bring an analog phone and a landline onto SIP. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar DAG1000-4O 4-Port FXO Analog VoIP Gateway
The Dinstar DAG1000-4O is a 4-port FXO gateway that brings existing PSTN landlines into an IP PBX as SIP trunks. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar DAG1000-4S 4-Port FXS Analog VoIP Gateway
The Dinstar DAG1000-4S is a 4-port FXS gateway that connects analog phones and fax machines to any SIP PBX. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar DAG1000-4S4O Hybrid FXS/FXO VoIP Gateway
The Dinstar DAG1000-4S4O is a hybrid gateway combining 4 FXS and 4 FXO ports so analog phones and landlines share one appliance. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar DAG1000-8O 8-Port FXO Analog VoIP Gateway
The Dinstar DAG1000-8O is a 8-port FXO gateway for connecting multiple PSTN landlines to a SIP phone system. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →
Dinstar DAG1000-8S 8-Port FXS Analog VoIP Gateway
The Dinstar DAG1000-8S is a 8-port FXS gateway that connects analog phones and fax machines to any SIP PBX. Supplied, installed, programmed and supported in Kuwait by UltraTech.
View Solution →Customer reviews
No reviews yet for Dinstar MTG200-1E1 Digital E1/T1 PRI VoIP Gateway. If you have used this product, yours would be the first.
Write a review
Share your experience with Dinstar MTG200-1E1 Digital E1/T1 PRI VoIP Gateway to help other buyers in Kuwait.