Enterprise Access Hub

466.000 KDOrder now

1 / 8

Enterprise-grade access hub with entry and exit control up to eight doors and battery backup support.

466.000 KD

Available on Project Basis

Supply confirmed upon project scope — contact us to begin

Order on WhatsApp Call

Need it installed? Get a site quote

Pay with

Licensed InstallerKuwait CoveragePost-Install Support

Expert Installation

Certified engineers on-site

Warranty Covered

Manufacturer warranty

Fast Deployment

Quick turnaround

Ongoing Support

AMC & technical support available

Who This Is Built For

Features	(8) Lock terminals (12V or Dry)(8+8) Inputs for request-to-exit devices and door position sensors(8) PoE ports for Access Readers(4) AUX terminals for chimes, sirens, or door openers(1) Battery backup input (32–48V)

Technical Specifications

Weight: Device: 9.1 kg (20 lb), Mount: 624 g (1.4 lb)
Buttons: (1) Factory reset
Mounting: Wall
Dimensions: 379 x 355 x 105 mm (15 x 14 x 4.1")
Power Method: Universal input, 100–240V AC, Max. 4.4A, 50/60 Hz, 32–48V DC Lead Acid Battery, Max. 7.5A @32V
Power Supply: AC/DC, internal
UL 294 Level: Destructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I
Digital Input: (8) Inputs for request-to-exit devices (8) Inputs for door position sensors (1) Emergency
Po E Interface: (8) PoE+ outputs, 50V DC, 30W per port (Max 190W aggregated)
Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Mount Material: SGCC steel
NDAA Compliant: Yes
Input Terminals: (8) Door exit request (8) Door position (1) Emergency
Supported Doors: 8
Dry Output Relay: (8) Lock terminals (12V or Dry) (4) AUX terminals for advanced setup (Chime/Siren/Door opener)
UL 294 Statement: Compliance with IEEE 802.3 specifications was not verified as part of UL 294., The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
Enclosure Material: SGCC steel housing with polycarbonate cover
Maximum User Count: 10,000
Networking Interface: (10) 10/100/1000 Base-T
Powered Output Relay: Lock: 12V DC, 1A/ Dry, Aux: Dry only
Indoor And Outdoor Use: Indoor only
Management Application: Access
Max. Power Consumption: 240W
CAN/ULC-60839-11-1 Grade: Grade assignment: I
Po E Cabling Requirements: Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site., The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
Max. Po E Wattage Per Port: 30W
Ambient Operating Humidity: 5 to 95% noncondensing
Ambient Operating Temperature: 0 to 40° C (32 to 104° F)
Recommend Max. Cable Length · Other Locks (1A): 24 AWG length: 9 m (30 ft), 22 AWG length: 15 m (49 ft), 20 AWG length: 24 m (79 ft), 18 UACC-Cable-DoorLockRelay length: 36 m (118 ft)
Document Number, And Issue Date And/Or Revision Level: EAH-8, Ver 01
Recommend Max. Cable Length · UA-Lock-Electric (400m A): 24 AWG length: 25 m (82 ft), 22 AWG length: 42 m (138 ft), 20 AWG length: 66 m (217 ft), 18 UACC-Cable-DoorLockRelay length: 100 m (328 ft)
Recommend Max. Cable Length · UA-Lock-Magnetic-270kg (800m A): 24 AWG length: 12 m (39 ft), 22 AWG length: 20 m (66 ft), 20 AWG length: 30 m (98 ft), 18 UACC-Cable-DoorLockRelay length: 46 m (151 ft)
Recommend Max. Cable Length · UA-Lock-Magnetic-540kg (500m A): 24 AWG length: 20 m (66 ft), 22 AWG length: 32 m (105 ft), 20 AWG length: 51 m (167 ft), 18 UACC-Cable-DoorLockRelay length: 80 m (262 ft)