Ubiquiti Device Bridge Pro (UDB-Pro) Wireless Bridge

5 GHz wireless bridge with PoE output, intended for point-to-point or uplink bridging over long distances up to 5 km.

Contact for Availability

Get a custom quote from our team

Ask for price Call

Need it installed? Get a site quote

Pay with

Installation, warranty & supportWi-Fi access point installation: 5–25 KWD per point · 1-year hardware warranty

Licensed InstallerKuwait CoveragePost-Install Support

Expert Installation

Certified engineers on-site

Warranty Covered

Manufacturer warranty

Fast Deployment

Quick turnaround

Ongoing Support

AMC & technical support available

Who This Is Built For

Features

5 GHz wireless bridge with long-range capabilityPoint-to-point connectivity up to 5 kmPoE passthrough for downstream device powerUniFi Auto-Link technology for seamless integrationIPX6 weatherproof outdoor designInternal directional antenna with 19 dBi gainDual Gigabit Ethernet portsProfessional mounting options (pole/wall)UV-resistant polycarbonate enclosureWide operating temperature rangeHigh wind load resistanceNDAA compliant for government useComprehensive regulatory certificationsProfessional installation recommendedIncluded PoE adapter and mounting kit

Technical Specifications

Weight: Device ~431 g; with mount ~515 g
Dimensions: Ø 189.5 × 64.3 mm (≈ 7.4″ × 2.53″)
Antenna Gain: ~19 dBi (5 GHz)
Max TX Power: 25 dBm (conducted) on 5 GHz
Link Distance: Up to ~5 km (3.1 mi) under ideal conditions
Max Data Rate: 867 Mbps (5 GHz, 80 MHz bandwidth)
Voltage Range: 42.5–57 V DC
Ethernet Ports: 2× Gigabit RJ45 ports
Frequency Band: 5 GHz only
NDAA Compliant: Yes
Weather Rating: IPX6 (weatherproof)
Wi Fi Standards: WiFi 5 (802.11ac), backward compatible with 802.11a/n/ac
Mount Materials: UV-stabilized polycarbonate + stainless steel
Po E Passthrough: Supported when input is PoE+
Spatial Streams: 2×2 MIMO on 5 GHz band
Included Adapter: 48 V, 0.32 A PoE adapter
Mounting Options: Pole mount, wall mount
Wind Load Rating: 69 N at 200 km/h
Po E Configuration: One port for PoE input, one for PoE output/passthrough
Enclosure Material: UV-resistant polycarbonate
Operating Humidity: 5% to 95% non-condensing
Auto-Link Technology: Automatic pairing/uplink to UniFi networks
Standalone Operation: Cannot operate standalone as full AP (bridge/uplink only)
Antenna Configuration: Internal directional antenna
Max Power Consumption: 9 W
Operating Frequencies: US/CA: 5150–5850 MHz; Worldwide: 5150–5875 MHz
Operating Temperature: –40°C to +60°C
Pole Diameter Support: 20–53.1 mm (0.8–2.1″)
Regulatory Compliance: CE, FCC, IC certified