Warehouses

Cold storage network in Kuwait: Wi-Fi and monitoring inside the cold room

Coverage planned inside the insulated room, not just outside it.

UltraTech Kuwait plans and installs the network for cold rooms and chilled or frozen warehouses in Kuwait: Wi-Fi inside the insulated rooms for scanners and terminals, access points and switches protected for the temperature, cabling through the panels, and the network for temperature sensors. We survey inside each cold room, because coverage outside a freezer does not mean coverage inside it.

Reviewed by Eng. M. Ahmed, Team Leader, Network & Project Specialist · Updated

Key facts

For
Chilled and frozen stores, food distributors, pharmacies' storage, cold rooms inside larger warehouses
Survey
Inside each room with the door shut, and at the door
Equipment
Access points and switches rated for the room, or in heated enclosures, or placed outside with coverage through the door
Cabling
Sealed penetrations through insulated panels, cables rated for the temperature
Sensors
Wired or gateway-based temperature sensors on the same managed network
Limit
Temperature compliance and product-safety rules are set by your quality system and authority, not by us
Where
All six governorates of Kuwait

Why cold rooms are hard

Cold rooms combine problems that each hurt a wireless network: insulated panels and metal that block signal, doors that open and close, equipment that is not made for low temperatures, and multi-level layouts where coverage looks fine on one floor and fails below.

  • Outside coverage is fine, inside the freezer there is none
  • Access points that fail or restart in the cold
  • Condensation when equipment moves between cold and warm
  • Sensor data that gaps when the Wi-Fi does
  • Mezzanines that shadow the level below

What we provide

  • Survey inside the room

    We measure with the door closed and at the door, since panels and doors change what the signal does.

  • Equipment for the temperature

    Access points and switches rated for the room, or protected in heated, powered enclosures, or placed outside the room with coverage through the door, depending on the room.

  • Cabling through panels

    Cable routes through insulated walls with the penetration sealed so the panel's insulation and hygiene are kept.

  • Network for sensors

    Temperature and door sensors on a managed network, wired where possible, with an alert path.

  • Power and alerts

    A UPS for the network and alerts when a sensor or a link drops.

How it runs

  1. 1

    Survey

    Each room, the door, the dock and the corridor between.

  2. 2

    Design

    Access point positions, enclosures, cable routes and sensors, in writing.

  3. 3

    Install

    Planned with your facilities team so rooms stay at temperature.

  4. 4

    Test

    Walk test inside each room with your devices.

  5. 5

    Handover

    Plan, results and an optional maintenance contract.

What the design depends on

  • Room temperatures and sizes
  • Panel type and where cables can pass
  • Racking and how full the rooms run
  • Which devices work inside the room
  • Number of sensors and who gets the alert
  • Levels and mezzanines

More explanation

Ways to cover a cold room

Access point inside, rated or heated
Best coverage. The access point must be rated for the temperature or sit in a heated, PoE-powered enclosure.
Access point outside, through the door
Simpler equipment, weaker coverage deep inside; suits small rooms.
Wired sensors
For temperature records, a wired sensor on PoE avoids depending on wireless in the room that blocks it most.

Choosing the approach

SituationApproachWhy
Large freezer with scannersRated or heated access points insideCoverage where the work is
Small chilled roomAccess point outside, near the doorSimple, no equipment in the cold
Temperature records onlyWired sensorsNo dependence on wireless
Multi-level storeSurvey each levelMezzanines shadow the level below

Specification

Equipment
Rated for the room, or in heated PoE enclosures
Cabling
Cat6 or Cat6A through sealed penetrations
Sensors
Wired on PoE or gateway-based, on the managed network
Power
UPS for the network equipment

What you receive

  • Coverage results measured inside each room
  • Cable and penetration records
  • A sensor and alert list
  • Admin accounts in your company's name
  • An optional maintenance contract
Everything in Warehouses

Tell us about your site

Every job is designed to the site and quoted in writing. Send your requirements or ask an engineer on WhatsApp.