Connecting warehouse buildings in Kuwait: fiber and wireless links
One network across every shed on the plot, tested and documented.
UltraTech Kuwait connects the buildings of a warehouse site in Kuwait, sheds, gatehouse, dock office and yard, into one network: fiber backbone between buildings with spare pairs for the future, point-to-point wireless links where nothing can be dug, a switch and rack in each building, and a test report for every link. We check the route and who owns the land between buildings before we price it.
Reviewed by Eng. M. Ahmed, Team Leader, Network & Project Specialist · Updated
Key facts
- For
- Several sheds on one plot, a gatehouse, a separate office, yard cabins
- Backbone
- Single-mode fiber between buildings, in conduit, trays or buried duct
- Spare capacity
- Extra fiber pairs left in the cable for growth and redundancy
- Where no cable can go
- Point-to-point wireless with a line-of-sight check
- Each building
- A rack, a switch and a UPS
- Evidence
- Fiber test report and a diagram for every link
- Before pricing
- Route check and confirmation of who owns or may use the land crossed
- Where
- All six governorates of Kuwait
Sheds on one plot, networks that are not
Warehouse plots grow shed by shed, and the network often grows with them: a switch in each building, links added when someone needed them, nothing documented. The result is a site where cameras, scanners and the office each reach the internet differently.
- Each shed has its own internet line
- A long copper run that is out of specification
- A wireless link added as a quick fix, never checked
- No diagram, so every fault starts with a walk
- The next shed will need yet another solution
What we provide
Route survey
We walk the plot, mark the routes, and check obstacles, roads, power lines and who owns the land between buildings.
Fiber installation
Single-mode fiber in conduit or trays between buildings, with spare pairs, terminated and tested.
Wireless links
Point-to-point links for the gatehouse, annex or a shed where digging is not possible.
Racks and switching
A rack, PoE switch and UPS in each building, managed centrally.
Documentation
A diagram, fiber test results and labelled ends.
How it runs
- 1
Walk the plot
Routes, distances and obstacles.
- 2
Design
Fiber or wireless for each building, with spare capacity.
- 3
Install
Planned around site traffic.
- 4
Test
Every fiber link measured.
- 5
Handover
Diagram, results and support.
What the design depends on
- Number of buildings and distances
- Whether conduits or trays exist
- Ground and surface along the route
- Ownership of the land crossed
- What each building needs: cameras, scanners, phones, office
- Future sheds
More explanation
Fiber or wireless between buildings
- Fiber
- The first choice: fast, not affected by weather, and electrically isolating the buildings from each other. Leave spare pairs, because adding them later means digging again.
- Point-to-point wireless
- For where fiber cannot go or must wait. It needs a clear line of sight and a proper mounting point, and it is tested for the speed it actually delivers.
- Right of way
- Cable across land you do not own or control needs permission. We ask before we price, so there is no surprise at the boundary.
Fiber and wireless compared
| Fiber | Point-to-point wireless | |
|---|---|---|
| Speed | Very high and consistent | High, depends on the link |
| Weather | Not affected | Needs a clear line of sight |
| Install | Needs a route to cable | Quick, no digging |
| Growth | Spare pairs add capacity | Limited per link |
| Best for | Permanent backbone | Gatehouse, annex, temporary sites |
Specification
- Backbone
- Single-mode fiber, spare pairs left
- Wireless
- Point-to-point links with a line-of-sight check
- Each building
- Rack, PoE switch and UPS
- Testing
- Fiber results for every link
What you receive
- A site diagram with every link
- Fiber test reports
- Labelled ends and racks
- Admin accounts in your company's name
- An optional maintenance contract
Related services
- Fiber Installation
- Fiber Splicing & Termination
- Fiber Testing
- Point-to-point wireless links
- Cable trays & containment
Tell us about your site
Every job is designed to the site and quoted in writing. Send your requirements or ask an engineer on WhatsApp.
More on warehouse IT
- Warehouse IT overviewHow the whole site's network fits together
- Warehouse Wi-FiCoverage at scanner height, tested on the pick path
- Scanners dropping off Wi-FiThe five checks, in order
- Internet failoverTwo lines, 5G and rack power
- Cold storage networkCoverage inside the cold room
- Warehouse CCTV networkDocks, yards and storage sized to your retention days
- Warehouse IT support contractVisits, fault response and documents for the network